Markbass MBH 110023 LITTLE MARK 800
The Little Mark 800 is basically a Little Mark III with an 800W power amp.
This high-power head is created for those who need simple, intuitive and effective controls
but also like to have a large supply of power and serious headroom.
A great choice for big-stage applications, and for louder bands. Its sound is exceptionally
warm and clear, both at low and high volumes. The ultra-fast response of the power amp allows
the best reproduction of every minute detail in your playing. The new DI output features a
pre-post EQ switch and output level control, so you can optimize the signal you send to the
mixer or recording unit.
INPUTS
INPUT: impedance 500 Kohm, max. voltage 15 Vpp
BALANCED INPUT (XLR): impedance 100 Kohm, max. voltage 25 Vpp
EFFECT RETURN: impedance 33 Kohm, max. voltage 10 Vpp
CONTROLS
GAIN: -60 dB to +23 dB range
MASTER VOLUME
LINE OUT LEVEL
GROUND LIFT (switch on rear panel)
PRE/POST EQ (switch on rear panel)
EQUALIZATION
LOW: center frequency: 40 Hz; level: ±16 dB
LOW MID: center frequency: 360 Hz, level: ±16 dB
HIGH MID: center frequency: 800 Hz, level: ±16 dB
HIGH: center frequency: 10 kHz, level: ±16 dB
VPF (Variable Pre-shape Filter): center frequency 380 Hz
VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz
OUTPUTS
LINE OUT: balanced XLR, max. voltage 20 Vpp
EFFECT SEND: unbalanced, max. voltage 20 Vpp (pre-EQ)
TUNER OUT: unbalanced, max. voltage 2 Vpp
SPEAKER OUT: speakon/1/4" combo, 1/4"
OTHER
WEIGHT: 6.39 lbs / 2.9 Kg
WIDTH: 10.87 in. / 27.6 cm
DEPTH: 9.84 in. / 25 cm
HEIGHT: 3.27 in. / 8.3 cm
OUTPUT POWER: 800W RMS @ 4 ohms / 500W RMS @ 8 ohms
POWER REQUIREMENT:100/120V; 230V; 240V - 50/60Hz (Voltage is factory preset according to region of sale)
Minimum ohm load for all Markbass heads is 4 ohms.
Markbass amps/combos are manufactured to be sold and used in the country of purchase,
and they are factory preset to that country’s voltage. Due to homologation issues,
the voltage may not be changed.Rack ears do not come included with this head.
Product specifications are subject to change without notice.